Blog Section

DIY Electrics – Safety Tips

DIY Electrics – Safety Tips

Each year, million of people around the world fiddle around with electric installations and devices in their homes. Thousands of them are dangerously injured or even die because they treat this task lightly. Most of the people turn to DIY methods because they do not want to pay for expensive repairmen. However, the most important thing to remember is that some projects can be considered DIY; some cannot. Sometimes a licensed Montclair electrician is the only solution.

Even if you decide to fix an electrical problem yourself, you have to be aware that danger is always present and it can carry serious consequences. We will tell you about a few basic concepts of safety, so you reduce the risk to a minimum. Working with electricity is a serious job and demands high concentrations, thorough planning, and extreme care.

DIY facts and stats

DIYToolsHeader-250x200First, let us tell you a bit more about some important facts and figures of DIY home projects. For example, statistics say that more than 70 people in the US die each year as a result of home electrocutions connected to consumer products. Exposed wiring, household wiring or damaged electrical circuits in your home are also very dangerous. They amount to almost 15% of total electrocutions. The lead cause of fires in the residential building is malfunctioned electrical systems. Last year, there were more than 360.000 fires with almost 2.500 deaths.

Safety advice

Once again, having a licensed electrician from West Orange electrician, for example, is the smartest thing to do. However, if you decide to tackle the problem yourself, be careful and follow these valuable tips. Before you start working, learn as much as you can about your wiring system. It is the best way to understand the seriousness of the task at hand.

kids

If you think the job is above your skill level, simply call up a professional. Always, always turn of the power before you start to work. Switch off all the main circuit breakers. Before you touch any of the power lines, make sure you test them with the proper tools. Finally, never come in contact with gas or plumbing pipes when handling electrical projects.

Most Efficient Methods To Heat Up Your Home

Most Efficient Methods To Heat Up Your Home

Heating efficiency can be viewed from a few angles. Cheap is good, of course, but there are other factors to consider when evaluating efficiency as a whole. For example, solar or geothermal energy are excellent when it comes to environmental effects. But often cannot produce the heating results of traditional fossil fuels. Efficiency, therefore, depends on several factors which, combined, produce the best result.

Heating efficiency pre-requisites

Before you start thinking about which kind of fuel or method you should use to keep your home warm during the long winter months. You should take the following into consideration. First of all, check the insulation of your house.

ThinkstockPhotos

Your home has to be well insulated and air-sealed. It minimizes heat to escape. Also, do your research and check the availability of different fuels in your surroundings. Even if the wood burning furnace is the quickest and cheapest solution for you. The price of fire wood in your area might be high compared to some other parts of the country.

What makes up an efficient heating system?

Heating efficiency is the combined result of three main factors: environmental costs, conversion of energy and financial costs and installation. Some heating solutions rely on fossil fuels like gas and oil, and they provide a good rate of energy conversion (fuel into heat). But they carry the environmental stigma because they produce polluting greenhouse gasses. On the other hand, solar or geothermal energy sources are unbeatable when it comes to environmental effects. They are completely „green,“ meaning they have no direct negative impacts on the environment.

Heat up systems

Energy conversion efficiency is described as the difference between the energy invested and thermal energy produced. Geothermal sources are unbeatable here. Because as much as four times as much thermal energy is gained with the energy from the earth than invested as electricity to run the pumps which extract the heated water.

Conclusion

Here at West Orange heating and cooling, we believe that solar energy is at the top of the efficiency list, when all things are considered. But will not keep your home warm during the long, dark winters. Other energy sources have to be individually assessed taking into account specific heating demands.

Natural gas and wood are still common and acceptable solutions, and geothermal energy is good for larger buildings. Electric heating is the least efficient model.

Cooling Your Office Space: Opting For A Split System

Cooling Your Office Space: Opting For A Split System

You want to open a new office in a place where the summers are long and hot. If you want your employees to be productive at their workplace, you will have to provide the right conditions. And for that, you will have to keep the heat out of the office. You need a good air conditioning solution to secure the optimal 23 to 24 degrees celsius.

cool-off-today

Most businesses opt for a central air conditioning systems and search for properties equipped with one. If you are moving into an older building you want to refurbish, you will have to do the research and see which system will do a better job for you. Here at Bloomfield heating and cooling, we recommend a good split system – read on for more information.

Advantages of Ductless Mini Split System

The main good features of this common air conditioning system are a simple installation and small size combined with excellent flexibility and adaptability. It has two main components: an outdoor unit which interacts with the outside environment and the indoor unit which keeps a steady temperature inside. They are connected via a conduit.

The main advantages of this system are ease of installation and use, compact size which means great flexibility and the fact that they do not require any existing ductwork in the building. It means they work particularly well with older buildings which have thick walls and lack the ductwork infrastructure. They are mounted very quickly and easily, and they keep the inside temperature constant during the summer. Another good feature is that they can also keep the inside of the building warm during the winter. These systems also tend to be a little quieter when compared to centralize units.

Disadvantages

The main drawbacks of split systems are the installation costs in big buildings because they require proper placement and sizing. Big buildings will require a lot of individual units set up in the right way. Also, another thing to keep in mind is the aesthetic effect on the outside of the building. Some cities have strict codes which regulate the placement of outdoor units.

What is best most efficient energy source for a heating system?

Visit Us

Latest Pins on Pinterest

  • Check out these cool water heating facts and learn about the different water heaters on the market.

  • Follow Me on Pinterest

Tumblr

Our Partners

DIY Radiant Floor Heat