Each year, million of people around the world fiddle around with electric installations and devices in their homes. Thousands of them are dangerously injured or even die because they treat this task lightly. Most of the people turn to DIY methods because they do not want to pay for expensive repairmen. However, the most important thing to remember is that some projects can be considered DIY; some cannot. Sometimes a licensed Montclair electrician is the only solution.
Even if you decide to fix an electrical problem yourself, you have to be aware that danger is always present and it can carry serious consequences. We will tell you about a few basic concepts of safety, so you reduce the risk to a minimum. Working with electricity is a serious job and demands high concentrations, thorough planning, and extreme care.
DIY facts and stats
First, let us tell you a bit more about some important facts and figures of DIY home projects. For example, statistics say that more than 70 people in the US die each year as a result of home electrocutions connected to consumer products. Exposed wiring, household wiring or damaged electrical circuits in your home are also very dangerous. They amount to almost 15% of total electrocutions. The lead cause of fires in the residential building is malfunctioned electrical systems. Last year, there were more than 360.000 fires with almost 2.500 deaths.
Once again, having a licensed electrician from West Orange electrician, for example, is the smartest thing to do. However, if you decide to tackle the problem yourself, be careful and follow these valuable tips. Before you start working, learn as much as you can about your wiring system. It is the best way to understand the seriousness of the task at hand.
If you think the job is above your skill level, simply call up a professional. Always, always turn of the power before you start to work. Switch off all the main circuit breakers. Before you touch any of the power lines, make sure you test them with the proper tools. Finally, never come in contact with gas or plumbing pipes when handling electrical projects.